Amazon Echo Dot v2 Acoustic Stand
Description
This Is A Cradle With Stand For Amazon Echo Dot V2. Cradle Can Be Used Alone Without The Base. The Bell Part Inserts Into The Bottom Of The Base, This Should Be A Good Friction Fit. Minimum Supports Are Needed When Printing The Cradle Where There Is A Gap For The Usb/Audio Cables, Otherwise No Supports Should Be Needed With Proper Layer Cooling. Set Your Extrusion Width To 0.4Mm To Print This Design. Update 1/5/2017: Added "Cheesy" Cradle
Statistics
Likes
620
Downloads
0