Printed LED Desk lamp
Description
A Simple Led Lamp That Is Mostly Printed. You Need: 3X 20Cm Led Strips 1X 6Mm Smooth Rod (Threaded Works Also, You Can Choose The Lenght; I Have 350Mm) 1X Cable 1X Power Source To Drive Your Leds 1X Screws (5 X M3X10; 3 X M3X20) 1X Flip Switch (20Mm Hole Fitting) Instruction: 1. Print All The Stl Files 2. Begin To Glue The 20Cm Led Strips In The Lamp 3. Solder All The 3 Strips In Parallel 4. Assemble The Holder By Screwing Them To The Lamp And On To Each Other 5. Put The Smooth Rod Into The Holes And Clamp It (Maybe You Need To Drill The Holes Out) 6. Put The Flip Switch In The Cover And Solder The Wires From The Led Strips 7. Final Assemble Screwing The Printed Parts Together 8. Done -> Profit I Apologize For My Englisch. :/
Statistics
Likes
74
Downloads
0