Raspberry Pi Camera Module Adapter for Micro Four Thirds Mount.
Description
Adapter For Raspberry Pi Camera Module With M43 Mount ==================== Caution: ----------------------------------- Do This At Your Own Risk! This May Harm/Destroy Your Raspberry Pi Camera Module. What You Need? ----------------------------------- Raspberry Pi Camera Module V2 (V1 Should Be Okay But I Didn'T Try.) Lens Or Telescope Uses Micro Four Thirds Mount. Camera Module Lens Is Attached As A Screw. Turn The Lens Module Counter Clockwise Then You Can Remove The Lens. How To Use It ----------------------------------- 3D Print This Thing And Do This. Please Refer To Pics In "How I Designed This" Section, Too. ### 1. Detach Lens From Raspi Camera. Camera Module Lens Is Attached As A Screw. Detach The Lens Module By Rounding Lens Counter Clockwise. Afterword, I Recommend To Re-Attach The Lens Loosely So That You Can Remove It Easily When Finish. ### 2. Attach The Camera Put Your Camera Module. See Pictures Below. ### 3. Attach M43 Lens. Depends On The Lens, You Can Not Adjust Focus Using Lens Feature Such As Focus Ring. In This Case, Try Zoom In/Out. Or Modify This Thing As You Like. In My Case, Attached To My Telescope With M43 T-Adapter. So Far So Good. If You Have Pibow Case, You Can Use 2Nd Stl "Raspberry-Pi-Camera-Module-M43-W-Pibow.Stl" To Attach Raspberry Pi Onto This Module.
Statistics
Likes
8
Downloads
0