Illuminated Arcade Spinner

Description

This Is A Diy Illuminated Arcade Cabinet Spinner. Estimated Costs Are Less 10€. Bom: - Itr9608 2X (0,40 €) - Ws2811 5Mm 4X (1,00 €) - Arduino Pro Micro 1X (3,00 €) - Ballbearing 8X22X7 Mm 1X (1,00 €) - M5X16 Screws 6X - M5 Nuts 6X - M3X16 Screws 5X - Flat Ribon Cable (3 Wires, Approx 50Cm) 3D Printed Parts (Approx 60Grams Material): - Tos_Base.Stl (Transparent Material, 50% Infill) - Tos_Core.Stl (Transparent Material, 50% Infill) - Tos_Knob.Stl (Transparent Material, 100% Infill) - Tos_Flywheel.Stl (Transparent Material, 50% Infill) - Tos_Encwheel.Stl (Black/ Nontransparent Material, 50% Infill) - Tos_Tool.Stl (Any Color, 50% Infill) Video With Building Instructions On Youtube: Https://Youtu.Be/Xyoa1Lehpjq Wiring: The Itr9608 Consists Of A Phototransistor And An Integrated Led. The Phototranistors Ground Needs To Get Connected To The Arduinos Ground, The Phototransistors Signal Line To Arduinos Io-Pin 2 Or 3. The Integrated Leds Cathode Need To Get Connected To The Arduinos Ground And The Anode To 180 Ohm Resistor Which Is Connected To Arduinos 5V Pin. Note: Check The Tiny Imprint On Topside Of The Itr9608. Additional Wiring For Optional Addons As Supported Since Firmware Version 2: - A Second Spinner Is Also Supported By The New Firmware. Just Add The Two Itr9608 For The Second Spinner Analog To The First One, But Use Io-Pins Tx0 And Rx1 (Instead Of 2 And 3) - By Connecting Io-Pin 7 To Ground, The Spinner Which Is Connected To Tx0 And Rx1 Will Move The X-Axis, Disconnect Pin 7 From Ground And The Same Spinner Will Move Along The Y-Axis (Changes To The Setting Will Become Effective After Disconnecting/ Reconnecting The Usb Cable). - By Connecting Io-Pin 8 To Ground, The Spinner Which Is Connected To Pins 2 And 3 Will Move The X-Axis, Disconnect Pin 8 From Ground And The Same Spinner Will Move Along The Y-Axis (Changes To The Setting Will Become Effective After Disconnecting/ Reconnecting The Usb Cable). - Connect Some (Daisy-Chained) Neopixels To 5V, Ground And Io-Pin 5 And The Neopixel At Address 0 Will Become Color Animated According To The Speed Of The Spinner Connected To Pins 2 And 3: Color Fades From Blue (No Motion) Over Pink To Glowing Red (Maximum Speed). Same Color Animation For Neopixel At Address 1 According To The Speed Of The Spinner Connected To Io-Pins Tx0 And Rx1. - As Side Effect Of Supporting Two Spinners That Can Be Configured For X- And Y-Axis, It Is Now Also Possible To Use Controller And Firmware As Input Controller For Track Balls. Firmware And Controller: The File Tospin_Fw.Hex Contains The Firmware That Needs To Be Uploaded To The Arduino Pro Micro. Use Arduinobuilder Or Avrdude For Upload Of The Firmware: Http://Arduinodev.Com/Arduino-Uploader/ Once The Firmware Is Uploaded, The Spinner Will Be Automatically Recognized As Usb Mouse By Any Os That Supports That Type Of Hardware. Important Note: There Are A Lot Of Different Arduino 'Flavors' Out There. But It Must Be A Version Based Upon Atmega32U4 (Arduino Pro Micro, Arduino Micro, Arduino Leonardo). Based On That And Due To The Small Form Factor, Arduino Pro Micro Ist Highly Recommanded. Update 09.01.2017: Uploaded A Short Demo Video To Youtube: Https://Youtu.Be/Wciapueyzxw Update 16.01.2017: Did A New Demo Video That Demonstrates The Control Of A Second Spinner And Also The Color Animated Neopixels: Https://Youtu.Be/9Jsxezv_6Ce Sources: Itr9608 - Aliexpress: Https://De.Aliexpress.Com/Item/10Pcs-Itr9608-Itr-9608-Dip-4-Opto-Photo-Interrupter-Optical-Sensor-Dip4-Best-Quality-New-Free/32657347266.Html?Spm=2114.010208.3.10.Bovsnd&Ws_Ab_Test=Searchweb0_0,Searchweb201602_2_10065_10068_10000009_10084_10083_10080_10082_10081_10060_10062_10056_10055_10037_10054_10033_10059_10032_10099_10078_10079_10077_426_10103_10073_10102_10101_10096_10052_10053_10107_10050_10106_10051-10050_10037,Searchweb201603_3,Afswitch_5,Single_Sort_0_Default&Btsid=956Fb3A8-E504-45D2-B58B-568B0F804506 - Amazon: Https://Www.Amazon.De/St%C3%Bcck-Itr9608-Itr-9608-Dip-4-Opto-Unterbrecher/Dp/B016Fdncvo/Ref=Sr_1_7?Ie=Utf8&Qid=1483792106&Sr=8-7&Keywords=Itr9608 Ws2811 5Mm - Aliexpress: Https://De.Aliexpress.Com/Item/Ws2812D-5Mm-Rgb-Ws2811-Leds-Rgb-Full-Color-With-Ws2811-Ic-Built-In/32694100033.Html?Spm=2114.010208.3.94.Ab9Gcd&Ws_Ab_Test=Searchweb0_0,Searchweb201602_2_10065_10068_10000009_10084_10083_10080_10082_10081_10060_10062_10056_10055_10037_10054_10033_10059_10032_10099_10078_10079_10077_426_10103_10073_10102_10101_10096_10052_10053_10107_10050_10106_10051,Searchweb201603_3,Afswitch_5,Single_Sort_0_Default&Btsid=456E54Aa-70D4-41Fa-A2Bd-4377B3806717 - Amazon: Https://Www.Amazon.De/Pl9823-F5-Bgl-Ws2812-Integrierter-Controller/Dp/B00L9I1P5G/Ref=Sr_1_1?Ie=Utf8&Qid=1483792061&Sr=8-1&Keywords=Ws2811+5Mm - Adafruit: Https://Www.Adafruit.Com/Products/1938 Arduino Pro Micro - Aliexpress: Https://De.Aliexpress.Com/Item/Free-Shipping-Atmega32U4-Game-Board-Module-Esplora-With-1Pcs-Mini-Usb-Cable-For-Arduino/1847119261.Html?Spm=2114.010208.3.2.D1Byd8&Ws_Ab_Test=Searchweb0_0,Searchweb201602_2_10065_10068_10000009_10084_10083_10080_10082_10081_10060_10062_10056_10055_10037_10054_10033_10059_10032_10099_10078_10079_10077_426_10103_10073_10102_10101_10096_10052_10053_10107_10050_10106_10051-10050_10037_10077,Searchweb201603_3,Afswitch_5,Single_Sort_0_Default&Btsid=69B9C563-51Da-4Cd2-B617-39Dab91B8751 - Amazon: Https://Www.Amazon.De/Kookye-Micro-Module-Atmega32U4-Header/Dp/B01Haz2M8A/Ref=Sr_1_2?Ie=Utf8&Qid=1483792017&Sr=8-2&Keywords=Arduino+Pro+Micro Ballbearing 8X22X7 - Amazon: Https://Www.Amazon.De/Familymall-Kugellager-Miniatur-Rillenkugellager-Bearing/Dp/B00Swglbyi/Ref=Sr_1_1?Ie=Utf8&Qid=1483791947&Sr=8-1&Keywords=Kugellager+22Mm - Amazon: Https://Www.Amazon.De/Robomall-10-Kugellager-608-Zz-22/Dp/B01B360B1W/Ref=Sr_1_9?Ie=Utf8&Qid=1483791947&Sr=8-9&Keywords=Kugellager+22Mm

Statistics

Category

Tags