Super Bomberman
Description
I Recently Bought Bomberman Live For My Xbox One And The Memories Came Flooding Back. I Wanted A Model To Print But I Could Only Find One Tiny One So I Made My Own. <B>Update 5/15/17:</B> I'Ve Finally Printed This! I Printed It At 75% Scale (See Bottle For Scale). All Printed In Gizmodorks Pla, 0.2Mm Layers And 25% Infill. I Changed The Bomb, Body And Head To Each Be Two Pieces Which Makes Them Easier To Print. I Just Used Hot Glue To Stick The Parts Together. I Also Made A Flame That I'M Going Ot Light With An Led With A Flickering Effect. I'Ll Put A 500Mah Lipo And An Adafruit Trinket Inside The Bomb. I Made A Hollow Version Of The Bomb Fuse To Facilitate Running Wires To The Led. I'M Going To Either Paint The Fuse With Tan Paint Or Reprint It With A Sample Of Colorfabb Woodfill I Have Coming. I Printed The Head In White Then Used Testors Gloss Cream Enamel Model Paint For The Face, Gloss Black For The Eyes And Gloss Yellow For The Belt Buckle. I Also Added The Eyebrows And Tacked Them Above The Eyes With Hot Glue. For The Belt I Printed The Top Half Of The Body Starting With Black Pla Then Switched To Red After The Belt Layer To Avoid Needing To Paint The Belt Afterwards. <S>I Have Not Printed This Yet So I Have No Ideas For Print Settings Or Anything Yet. Hopefully In The Coming Weeks I Can Get It Printed And Assembled. I'M Sure Some Parts Will Require Support The Legs, Arms And Antenna Support Can Probably Be Printed With 0% Infill So You Have Just A Hollow Shell And Won'T Need To Use A Lot Of Filament.</S> Each Piece Is Separate So You Can Print In The Color Of Your Choice. The Head And Helmet Are One Piece So You Can Paint The Face. The Body And Belt Are Also One Piece So They Will Require Painting As Well. I'Ve Uploaded The Stl'S As Well As The Inventor Files. I'Ve Also Uploaded Both The One-Piece And Two-Piece Versions Of The Head, Bomb And Body.
Statistics
Likes
47
Downloads
0