T-Rex Cooler Mk3 (Updated)

Description

---- This Cooler Will Only Fit The V2.1 Printers --- This Is Due To The Different Stock Bearing Assembly. "All The Dinosaurs Feared The T-Rex!" This Is My Take On A Good 50Mm Blower Cooler Setup For The Wanhao I3 V2.1 And Its Clones. The Big Advantages Of This Design Are As Follows: -Optimized Cooling Area. -Massive Print Visibility Increase. -Ultra Lightweight. -Only The Tips Of The Air Nozzle Is Close To The Print Bed. -Users Can Now Create Their Own Nozzles And Use My Mounting System To Mount Them! ---- This Cooler Will Currently Only Fit The V2.1 Printers --- This Is Due To The Different Stock Bearing Assembly. Required Items: - Wanhao I3 Or Clone With V2.1 Bearing Holders - 3X M4X20Mm Https://Tinyurl.Com/Ybxu74Hu - 1X M4X8Mm Https://Tinyurl.Com/Ybxu74Hu - 1X 50Mm Blower Fan. Http://Tinyurl.Com/Gocduog If You Do Decide To Print This Cooler I Highly Suggest You Consider Adding My Led Light Bar To Your Old Cooler Mount Up Front! Http://Www.Thingiverse.Com/Thing:2018702 Please Feel Free To Contact Me With Any Advice, Ideas, Or Complaints. Tips Are Much Appreciated! Future Improvements: -T-Rex W/Led @ 80% -Low Mounted Fan T-Rex @ 25% -Titan Nozzle @ 75% -Wanhao V1 And V2 Bearing Attachment. -Stock 40Mm Fan Version.

Statistics

Category

Tags