Rack and Pinion
Description
This Rack And Pinion Is The Most Useful One You Will Find! It Uses A Standard Servo (20Mm X 40Mm) That I Turned Into A Gear Box. This Has A 200Mm Rack, I Have Added A Hole To Each End Of The Rack For Mounting. The Printer Build Plate Determines The Size I Can Print. If You Need A Longer One, You Can Do The Modification With One Of The Many On-Line Programs. You Will Need To Buy One Part, It Is The Servo Spline Post That Will Need To Be Glued In. Http://Www3.Towerhobbies.Com/Cgi-Bin/Wti0001P?&I=Lxwwg3&P=7 6 - 2.5 X 8 Screws Hold The Cover On And 4 - 3 X 8 Washer Head Screws Hold The Housing To The Servo.
Statistics
Likes
58
Downloads
0