Monoprice Select Mini pi camera mounting bracket
Description
My Monoprice Select Mini Has The Y-Axis Smooth Bars Bolted Directly To The Bed, So There Are A Couple Of Tiny Screw Holes In The Corner Of The Bed, Perfect For Mounting My Camera To For An Octoprint Setup. If You Have The Older Select Mini, You Can Still Use This By Just Swapping Out The Y Axis Bracket Screws For Longer Ones To Go Through This Bracket, Through The Holes, And Through The Y Axis Bracket. 12Mm Should Do It. I Wanted The Camera Offset At An Angle To Get A Better View Of The Print, So I Designed This Little Diagonal Mounting Bracket. Angled At 22.5 Degrees, The Screw Holes Are Inset So It'S Easy To Mount With An M3 Bolt And Nut. I Used The Front Of The Camera Case From This Thing: Http://Www.Thingiverse.Com/Thing:403712/ And The Back Of The Camera Case And The 40Mm Links From This Thing: Http://Www.Thingiverse.Com/Thing:247590 With A Few More M3 Bolts And Nuts, It'S All Put Together. Solid, So It Doesn'T Shake As The Bed Moves.
Statistics
Likes
76
Downloads
0