Best E3D Titan Adjustable Z Sensor 18mm mount
Description
This Is The Best Adjustable E3D Titan Z 18Mm Inductive Sensor Mount Out There! Adjust Your Z Sensor On The Fly. Access To Screw From Either Side. I Recommend Printing This With Supports. Version 1 Has A Tighter Clearance Than Version 2. Version 2 Also Has Nice Bevels And Takes Up Less Horizontal X Axis Space. Parts Needed: 18Mm Sensor E3D Titan Carriage Mount 2 X M3 Screws (Will Work Fine With One) 2 X M3 Nylon Nuts (Will Work Fine With One) Once You Hand Tune The Height Of Your Proximity Sensor You Can Tighten The Case Around The Sensor By Tightening Slightly The M3 Screw On The M3 Nylon Nut. This Will Keep Your Z Sensor From Moving Around. I Designed This After Battling Hours At A Time Recalibrating The Z Axis With Massive Tools In A Tight Space Only To Have It Fail After I Would Tighten The 18Mm Nuts. With This Build Those Problems Are No More. You Can Easily Lower And Raise The Sensor With Your Thumb And Fix The Sensor At Its Position By Tighten The Case. No More Tools, No More Banged Up Fingers Adjusting Your Z Sensor.
Statistics
Likes
3
Downloads
0