OpenRC 220 FPV Mini Quad
Description
Please Consider Supporting Me On Patreon: Https://Www.Patreon.Com/Danielnoree Important Notice: There Will Be A While Before I Get Another Set Of Electronics So That I Can Do A "Build With Me" Series For This One, Sorry. So If You Are Not Familiar With Fpv, Quads And Working With Electronics Maybe It´S Best To Wait. There´S Also Some Programming Needed Of Radio And Flightcontroller. If You Still Can´T Wait I Highly Suggest You Check Out The Resources About Fpv Below Before Even Thinking About Starting This Project. Joshua Bardwell On Youtube: Https://Www.Youtube.Com/User/Loraan The Blue Falcon Project On Youtube: Https://Www.Youtube.Com/Channel/Ucobmttkituprxbyhllwhe3W Propwashed Website: Http://Www.Propwashed.Com/ Openrc 220 Fpv Mini Quadcopter Is The Second Quadcopter To Join The Openrc Product Family. It´S A Modular, "Self-Supporting" Design Meaning That The Design Is As Strongest When Put Together With All The Other Parts. This Is A 220Mm Size Using 5" Props And The Idea Is To Print All Parts In A Somewhat Flexible Material To Allow For Better Impact Resistance In A Way That A Material Like Nylon For Example Will Allow Some "Give" And Thus Better Absorb A Hard Impact From A Crash. The Parts Alone Will Feel "To Flexible" But Once They Are In Place And Properly Secured With Screws It´S Rigid Enough. Even Something Like Pctpe May Be Suitable, Haven´T Tried It Yet. While Testing I Have Found That A Co-Polyester Like Colorfabb Ht Based On Color Amphora Ht5300 Or Nylon Filaments Are The Best Suited For This Design. A Cf Blend Like Colorfabb Xt-Cf20 Och Nylonx By Matterhackers Will Reduce The Weight By Approximately 20%. As Always Questions Are Best Asked In The Community On Either Google+ Or Facebook Below Is A List Of The Printed Parts Needed: 6X - Openrc_Mini_Quad_22Mm_Spacer.Stl 1X - Openrc_Mini_Quad_Electronics_Frame.Stl 1X - Openrc_Mini_Quad_Fpv_Ant_Lower.Stl 1X - Openrc_Mini_Quad_Fpv_Ant_Upper.Stl 1X - Openrc_Mini_Quad_Gopro_Holder.Stl 2X - Openrc_Mini_Quad_Main_Body_Bottom.Stl 2X - Openrc_Mini_Quad_Main_Body_Top.Stl 1X - Openrc_Mini_Quad_Top_Deck.Stl You Also Need Some Screws And Nuts For The Assembly: Hardware Needed: 20X – M3 Nuts 16X – M3 Screws For Motors (Supplied With Motors) 12X – M3X12 Screws 8X – M3X42 Screws Here Is A List Of Suggested Electronics And Other Things You Need To Get The Mini Quad Airborne: Http://Danielnoree.Com/?Page_Id=800
Statistics
Likes
303
Downloads
0