Quadrocopter - Explorer V2
Description
Https://Youtu.Be/Phaz_Excx5K !! Important !! The Rear Arms Are Different: Back-Arm-Left: Has Tilt Back-Arm-Right: No Tilt You Have To Choose One And Mirror Ist In Cura. This Is The Better And Stable Version Of My <A Href="Http://Www.Thingiverse.Com/Thing:1998043" Target="Blank">Quadrocopter - Explorer V1</A>. Http://Www.Thingiverse.Com/Thing:1998043 I Split The Top And Bottom Parts Because I Have A Max. 190Mm Print-Area You Need: 4 X M6 Screws And Bolts For The Arms (20 Mm) 16 X M4 Screws And Bolts For The Motors (16 Mm) 4 X M4 Screws And Bolts For The Top Joiner (12 Mm) 4 X M4 Screws And Bolts For The Bottom Joiner (12 Mm) 2 X M4 Screws To Join The Top And Bottom Front (12 Mm) 5 X M4 Screws To Join The Core (Mittel Part) And Bottom (16-18 Mm) 2 X M4 Screws To Fix The Top Core (12 Mm) 4 X M4 Screws And Bolts The Fix The Bec An The Fc (Naze32), Use The Spacer (20-30 Mm) Don´T Forget To Secure The Cabels Over The Arms. I Use: - Naze32 Full (30Mm X 30Mm Distance Between The Holes) - Bec (30Mm X 30Mm Distance Between The Holes) - 1000Kv Motors - 10 45 Props - 30A Escs - 4S 5000Mah - Turnigy 9X
Statistics
Likes
121
Downloads
0