Belt redesign for FT5 Revision 2 (X-Y idlers)

Description

This Is A Revised And Reworked Version From [This Design](Http://Www.Thingiverse.Com/Thing:1958418) Differences : Steppermotors Are Fixed With 4 Bolts Instead Of 2 And Adjusting The Tension Of The Belt Is Now Done At The Side Of The Pulley Instead Of Adjusting The Stepper. Pulley Support Is Fixed With 3 M5 Bolts And Nuts In The 2020-Profiles. This Is A Lot Easier To Manage And One Can Leave The Belt Attached To The X-Axis All The Time When Working In That Area. Just Loosen The Pulley Support And Leave The Belt Attached. **Things :** - Larger Stepper Support For The Right Side With The Integrated Cablechain Support - Stepper Support For The Left Side - One Pulley Support For Left And Right Side - Conical Piece To Be Mounted Under The Bearings. - New Support For The Right X-Pulley That Fits Better With The [Y-Endstop](Http://Www.Thingiverse.Com/Thing:2056683) **20170816 - Added 3Mm X Support ** Tip : Use [3D-Tool](Https://Www.3D-Tool.Com/En_Free-Viewer-Download.Htm) To Have A Detailed Look On This Thing

Statistics

Category

Tags