Concealed fixing hanger / hook
Description
This Is A Concealed Fixing Wall Hanger. Simply Screw The Bracket To The Wall Using A Small Counter Sunk Screw .The Base Has To Go The Right Way Up - There Is A Recess In The Square Cutout On The Top Side. Insert The Hook Into The Hole Angled Down Slightly As In The Diagram, And Press Down Until There Is A Click. I Printed At 45% Infill With 3 Perimeters And 3 Top And Bottom Layers In Pla. The Higher The Infill The Stronger It Should Be ,But I Haven'T Tried It Yet To See If The Hook Will Still Fit. The Tolerances Are Quite Tight. I'Ve Tested The Hook With A Heavy Leather Jacket And No Problems, I Would Recommend Using It For Something Smaller Though I Will Add Different Shape Bases When I Get A Chance. Sorry I Have To Add This - Disclaimer : If You Print This You Do So At Your Own Risk. If Anything Breaks Either With The Hook Or Bracket Or Anything You Hang On It, I Will Not Be Held Responsible.
Statistics
Likes
1
Downloads
0