rack mount case for pidp8
Description
A Rack Mount Case For Oscars Pidp8 Project. Http://Obsolescence.Wixsite.Com/Obsolescence/Pidp-8 This Is A Work In Progress. Made From 3Mm (Red) And 6Mm (Green) Mdf. Cyan Is Engrave. The Standoffs Above The Board Are 20Mm. 10Mm On The Rear, And 12Mm On The Front Of The Board, Hopefully Making It Sit Fairly Close To The Right Position. Assemble Pwba Mounting Plate As First Part Of Box. Some Pictures Do Not Show The Extra Strengthening Parts Behind The Board. Raspberry Pi Goes On Standoffs At The Front Of Case With The Hole On The Left Hand Side So That The Network Cable Can Come From The Rear Of The Cabinet (Through The Hole) & Into The Rj45 On The Pi. The Hole On The Top Of The Lhs Panel Is For My Hdmi To Vga Converter. 11Mm Hole At The Back For Power Connection. Key Lock For Power On. Front Panel Is Held By 4 Black Self Tapping Screws At The Sides (Not Through The Panel As On Some Photos) Let Me Know What You Think.
Statistics
Likes
19
Downloads
0