Drok 090638 Buck Boost DC Converter Enclosure
Description
I Use The Drok 090638 Buck Boost Converter With Automotive Diagnostic Tools To Ensure The Tool Always Gets 12V Even During Battery Sags Or Alternator Spikes. I Made This Enclosure To Keep The Board Safe. The "Pins" Are A Little Fidgety To Install, But Once Installed Stay Put And Allow You To Operate The Memory And On/Off Buttons Without Removing The Top. The Slots In The Bottom Are Primarily To Save Material, But Also Provide A Convenient Way To Mount The Enclosure If You Like - There Is A Couple Mm Of Clearance Between The Floor And The Board For A Screw Head. The Ears On The Side Allow You Secure The Input And Output Leads With Zip Ties So They Don'T Dangle. Please Note: The Enclosure Is Kind Of An Interference Fit - It'S About .5Mm Too Small In One Direction To Keep The Board Located. Should Be Fine! I'Ve Printed About A Half Dozen Of These Things And The Tolerances Are Spot On For The Boards I Have, But Do A Test Fit And Make Adjustments If Necessary - It'S Hard To Anticipate Your Printer And Drok'S Manufacturing. ;) Also Worth Noting - This Is Literally The First Thing I Have Ever Designed And The Second Thing I Have Ever Printed, So Take That For What You Will. ;)
Statistics
Likes
10
Downloads
0