FT-5 Adjustable Z Endstop
Description
* No Drilling Of Your Melamine Parts Are Required For This Model, It Used An Otherwise Unused Cnc Mounting Hole For The Adjustment Bolt. This Is An Adjustable Z Axis End Stop Modification For The Folgertech Ft-5. The Large End Stop Piece Is Secured By 2 Bolts On The Y Axis Cable Chain Mount, And 1-2 Bolts Around One Of The Z Axis Smooth Rods Depending On The Model You Download. This Piece Is Rock Solid When Installed. * Note - You Will Need To Swap The Shorter Bolts From The Cable Chain Mount With The Longer Bolts Used To Secure The Z Axis Switch. Adjustment Bolt Assembly From Bottom To Top... M3 40Mm Bolt (Shorter May Work) 2Mm Printed Washer Spring (I Used One From A Click Pen) 2Mm Washer Insert (Insert Facing Up) *Insert Through Underside Of Unused Cnc Mounting Hole Nut Capture M3 Nut Bolt Foot If You Have Any Questions Or Suggestions For Improvements Please Let Me Know. Happy Printing! *Update 01/26/17 - Some People Have Had Problems With Fitment Using The Stock Ft-5 X Carriage And Hot End. I Redesigned The Mount And There Are Now 2 Models Available (Stock And E3D V6). Both Of These Designs Should Now Work With The Stock X Carriage, Just Choose Which Model To Download Based On Your Hot End. Thank You For Your Suggestions On Improvements.
Statistics
Likes
5
Downloads
0