Kazzo V1.2 Rom Dumper Shell
Description
I Picked Up The Kazzo Rom Dumper/Programmer And Really Wasn'T Satisfied On How It Was Just A Board. So I Made A Nice Enclosure Meant For The Nes/Famicom Cartridge Combo. This Should Fit The October 2014 Variant Of Kazzo. If There Is Any Board Other Variations That This Works With (Other Than 1.2), Let Me Know. Edit: I Just Fixed The Nes Top Shell, It Had Tabs Like The Famicom, In Hindsight It Didn'T Need It So I Removed It. Sorry If You Printed It With This Issue For The Two People That Downloaded It. There Are Multiple Variations Of The Top Shell Because You Can Chose What Cartridge Slots. Chose One That Works For Your Cartridge Slot Setup. I Know I'M Missing Ones With Super Nintendo Compatibility Right Now, That'S Coming Soon. To Build This, You Will Need Some Screws Though: 4X M3 - 20Mm Long 4X M2 (Actually A Little Bigger) - 5Mm Long (I Just Used Old Dell Laptop Screws) Note: This Is Meant To Fit Older Versions Of The Kazzo. This Shell Will Fit The October 2014 Version, Not The October 2016 (Version 1.4) Version Which Is Different. ------------------------------------------------------------------------------------------------------------------------ *Bubble Bobble Is (Tm) Taito (Owned By Square Enix Holdings) *Nintendo, Nintendo Seal. And And All Related Logos Are Registered (Tm) By Nintendo *Super Mario Bros. Is A Registered (Tm) By Nintendo. These Works Show Functionality Of The Product That I Am Showing Off Here And Were Used Without Permission.
Statistics
Likes
15
Downloads
0