K8400 VERTEX Wire Covers (Rev. 2)

Description

<B>Update 16-Sep-2017</B> After Obtaining The Original Drawings Of Vertex K8400 I Discovered That Number Of Things Published Here Had Mounting Holes Not Perfectly Aligned With The Holes On Printer'S Side And Bottom Panels. I Corrected This And Publishing Today New Stl Files. If You Downloaded Old Files And Have Not Printed Them, Please Get The Latest Versions Posted Today.<Br/> <Hr> This Is The Second Edition Of My Wire Covers Posted Here Http://Www.Thingiverse.Com/Thing:1504532 New Covers Look Sleeker And Contain Shorter And Simpler Things Than In The Original Design. Thanks To <B>Hae9Wuum</B> For Suggesting To Go Without Nuts. This Suggestion Was The Main Reason I Decided To Redesign The Covers. I Rerouted The Wires Going To Z-Sensor, Y-Motor And Left Extruder. They Now Come Up Through The Center Hole Of The Bottom Panel. I Created A Cover For These Wires As Well, However It Is An Optional Piece. Use M3X8Mm, Or X10Mm Screws To Mount The Covers. You Will Need 30 Screws, Or 26, If You Do Not Intend To Install <B>Bottom_Under.Stl</B>.

Statistics

Category

Tags