Direct-drive Simplified
Description
**Uploaded 1/22/2017** **Updates:** *1/24/2017* 624 Bearing Idler Id Change To A More Press Fit, Widened Out The Lip For The Extruder Flange So That It Wasn'T So Tight To Install, Changed The Other Nut Hole To 3Mm Also *1/24/2017* Ptfe Inner And Outer Ports Implemented As Well As Further Tweaking With Size And Simplicity *1/26/2017* 624 Bearing Is Now Held By A Flat Head M4 Bolt And Nut. Widened The Ptfe Counter-Bores. Widened The Cold-End Flange Height. Removed Strange Flange That Prevented Easy Idler Inspection And Cleaning *2/27/2017* Stiffened The 624 Bearing Holder, And Also Now Does Not Need A Flat Head To Fit A Bolt Head To Hold The Bearing. With More To Come! **For 1.75Mm Extrusion** Remixed Around Cheap Chinese Hot End Off Ebay, And Existing Designs. ***Bom*** Bolts: M3 X 5 (3) M3 X 20 (4) M3 X 50 (4) M4 X 10 (1) Nuts: M3 (5) M4 (1) Also: 624 Bearing (1) Ptfe For 1.75Mm Filament (About 40Mm) Cable Ties (6) Optional 40 Mm Fan **Changes:** Standard Od For The Cold End (16Mm Flange Od & 12Mm Shaft +.1Mm/-0Mm), With A Flange Height Of 5Mm. Idler Remade For A 624 Bearing. Spring Tension Idler Is Now Made Fore A M3 Nut & Bolt. Modified To Hold Ptfe For Minimal Resistance By Request. Also Idler Modified To Use M4 Flat Head Bolt To Reduce Play. **Description @ Nitrositos Carriage** Http://Www.Thingiverse.Com/Thing:1964847 "A Carriage Remix. You Can Use Flanges To Hold. And Use The 4 Screws To Anchor The Extruder Completely. Un Remix Del Carriage. Puedes Usar Bridas Para Sujetar. Y Usar Los 4 Tornillos Para Anclar El Extrusor Completamente."
Statistics
Likes
9
Downloads
0