Printrbot Play 80mm Fan Shroud
Description
<P>I Had Issues With The Default Fans And Found A Usb Case Fan That Sounded Perfect For Experimenting With Getting My Play Working Right. As An 80Mm Fan, I Had To Make It Far Enough Back From The Extruder To Not Hit The Sides Of The Printer'S Case. I Haven'T Figured Out A Way To Setup A Print Cooling Fan, But This Fixed My Extruder Clogging Issues, The Heatsink Is Cool To The Touch Even After An Hour Of Printing! <P>I Had To Make A Few Edits After The One In The Picture, So It Might Not Be Perfect. I Recommend Printing At 100% Infill So The Weight Of The Fan Doesn'T Bend The Shroud. You Probably Know Your Print Bed Adhesion Better Then I Do, But I Used A Raft On Blue Painter'S Tape Prepped With Some Rubbing Alcohol. <P>Fan Shown: <A Href="Https://Www.Newegg.Com/Product/Product.Aspx?Item=N82E16811999130"> External Usb Case Fan</A>.</P>
Statistics
Likes
2
Downloads
0