LED Tape Clip
Description
Small Fixing Clip For An Led Light Strip. Mount With M3X12 Or M3X16 Wood Screw. Its Very Thin, So Take Care Not To Over-Tighten. Print With 100% Infill, 1 Wall Thick. On Edge, With Support If Necessary For The Screw Hole. The 'Pan' Variants Are For A Flat-Headded Screw, The Normal Ones For Countersunk. The Double Sided Ones Need Cleaning Up. Depending On Your Slicer, They May Print Ok, But Check First.
Statistics
Likes
120
Downloads
0