DrawingBot with improved head and rotate pen (for fountain pen)

Description

Based On Drawingbot By Makerc, With 5 New 3D/Stl Files That You Can Use To Add Improved Slider Stability For The Head, Including Pen-Tilt. You Can Set The Rotation In 3 Variations (Straight / 25 Degrees / 50 Degrees). In This Build I'Ve Used A Servo (Mc-375Dd), Which Has A Slightly Longer Shaft Section. Https://Youtu.Be/-Gbldp3Gtte Parts Used To Build: - 2X Stepper Motors (Sy42Sth47-1684A) - 1X Arduino Uno Board With Arduino Cnc Shield - 2X Pololu A4988 Stepper Driver (With Jumpers @ 4X Microstepping) - Gt2 Timing Belt (2 Meter) + 2X Gt2 20 Teeth - 4X Micro Switches On All Axis (Used As Normally Open) - 1X Servo Motor: Modelcraft Mc-375Dd [Http://Www.Conrad.Be/Ce/Nl/Product/275490/Digitale-Micro-Servo-Torque-48V] - Spring (Custom), This Gives Just Enough Force To Put Pressure On The Pen On The Paper/Surface (Like With Actual Writing By Your Hand) - All Other Screws/Parts/Rods/Bearings As Listed In The Original Thing Arduino Code: (Compiled And Uploaded Using The Arduino Ide; Make Sure To Update Config.H In Your <My Documents>/Arduino/Libraries/Grbl Folder To Enable Corexy !!!) [More Info On Corexy Here: Http://Corexy.Com/Theory.Html] - Grbl Arduino Firmware 0.9J (With Stepper Support) --> Use Gcode Command M03 S050 To Tilt The Servo To Release The Pen; Use Gcode Command M5 To Raise The Pen. [Https://Github.Com/Robottini/Grbl-Servo] - Inkscape To Draw/Import/Convert And Generate Gcode Files (From Extensions Menu) [Https://Inkscape.Org/En/] - Sourcerabbit Gcode Sender To Talk To The Plotter [Https://Www.Sourcerabbit.Com/Gcode-Sender/] Next Stl Upgrade To Come: Carrier That Can Rotate And Lock For A Fountain Pen (45C Angle) Stuck? Just Send Me A Message If You Have Any Question About This Build!

Statistics

Category

Tags