lamp bracket undermount
Description
The Clamp For My Swing-Arm Lamp Broke. I Found This Thing And Made It: Https://Www.Thingiverse.Com/Thing:21479 But It'S Only The Top. So I Made The Bottom Myself. This One Is Much Beefier Than The Original. Designed In Blender. Mine Was Printed Out Of Black Abs. I Had Some Warping On The Bottom, So I Sanded It Flat With 80 Grit Sandpaper After. I Did An Acetone Vapour Bath After To Clean Up The Lines. Both Pieces Actually Got The Same Treatment (Top And Bottom). I Still Had The Metal Bolt, The Nut, And The Plastic Knob From The Original Lamp Base. I Originally Created This Piece With The Hole Sized 8Mm, Which Is What I Measured The Bolt To Be, But Then I Found The Threads Were A Bit Bigger, So I Had To Drill It Out. I'Ve Increased The Hole Size To 9Mm In The Design So Anyone Else Printing It Won'T Have To Do That.
Statistics
Likes
4
Downloads
0