Micro-snyc receiver mount
Description
This Is Was A Test To See How Well A Microsync Receiver Would Sit Securely In This Mount. Usually The Mount Would Not Be Needed Because The Receiver Is Designed To Plug Directly Into A Strobe Powerpack/ Generator. The Mount Could Be Necessary When Used With A Hotshoe Based Flash And A Cord Is Used To Fire The Flash. This Is My Fourth Sketchup Design I Have Made. The Receiver Fits Very Securely In The Mount. This Can Be Screwed In Place, Taped Or Glued In Place. Carpet Or Faom Tape Would Be My Prefered Method.
Statistics
Likes
2
Downloads
0