Smart Parts Ion - Magwell Adaptor
Description
*** Work In Progress *** This Is A Streamlined Magwell Design Taken From An Ion Project Of Mine. More To Come As This Project Progresses. Requires M4 (Or 5/32) Machine Screws To Hold The Magwell In Place. *** Tipx Magwell *** -Requires No Modification To The Breech, Just Bolt It On And Go. -Requires A Small Spring And A M3 Screw. -Much Easier To Build (Recommended To Beginners) -No Fsr *** Milsig Magwell *** -Requires Major Modification To The Breech To Allow The Mag'S Follower To Reach The Bolt. -Fsr Is Possible With Enough Filing And Dremeling. Cut Slow. Take Your Time. -Cut Guide Is Included As A Reference Of What Breech Material Must Be Removed. -Front Barrel Oring Must Be Removed To Make Room, Resulting In Some Air Loss Every Cycle. -Do Not Cut The Rear Oring Behind The Cut Guide!!!!!
Statistics
Likes
59
Downloads
0