iPad Air 2 Cover
Description
Designed Up This Ipad Cover In Tinkercad. Worked Well. I'Ve Printed In Pla With And Without Support. Depending How Well Your Printer Is Dialled, It Is Possible To Bridge The Gap At The Plug End. Yellow Print Is Also Pla And Was A Test Piece To Confirm The Snug Fit. Pla Is Not Flexible Enough To Print Whole, So I'Ve Provided The Stl In Either Whole If You Print In A Flexible Filament Or 2 Halves For Printing With Pla Or Other Stiff Plastics. Both Halves Slide Onto The Ipad And The Friction Holds Them There. Use 0.25Mm Layer Height As The Design Thickness Are All A Factor Of 0.25Mm. My Machine Has A 0.4 Nozzle, I Used 0.8Mm Wall Thickness And 0.25 Layer Thickness. If You Are Over-Extruding The Fit Will Be Too Tight. No Guarantee On How Well This Protects Your Device.
Statistics
Likes
34
Downloads
0