Mount for Full Graphic LCD Controller
Description
January 22 I Wanted A Simple Mount To Attach A New [Reprap Discount Full Graphic Smart Controller](Http://Reprap.Org/Wiki/Reprapdiscount_Full_Graphic_Smart_Controller) To My Folgertech Printer. This Is Certainly Not A Case For The Electronics. At Some Point I'Ll Get Around To Enclosing The Electronics And Cleaning Up The Wiring, But That'S A Project For Another Day. The Corners Of The Controller Board Are Squeezed By The Four Bosses On The Mount. I Printed These Without Support And Did A Little Filing To Open Up The Groove For Each Corner. This Mount Is Attached To The Ramps / Arduino Mounting Panel With Two M3 Screws. Here Is The Design In [Onshape](Https://Cad.Onshape.Com/Documents/5887Ba9E08Dba31063554632/W/3911A9Fd9989E50D3E275Fad/E/768C610C0Cb62540Fe973F95). This Is For Pittsburgh'S [Fun A Day, 2017](Http://Funadaypgh.Blogspot.Com).
Statistics
Likes
5
Downloads
0