Incubator parts
Description
Updated 20190801 Added A 40Mm Fan Mount Well Here Is The Final Parts For The Incubator The Light Mount , Fan Mount , Thermostat, And Also An Egg Turner/Rocker . The Fan Gets Power All The Time To Keep The Air Flow Constant It Needs To Blow A Cross The Light Then To The Thermostat This Is Called A Forced Air System And A More Stable Temperature. Keeps The Temperature +-3 Degrees F. Fan Is Out Of A Computer And I Found One With A Speed Control And Set It To A Slower Speed I Looked At Instructions On Line Some Use The Same Thermostat It'S Made For A Water Heater Cost Less Than $10 And Covers The Temp Of 98-100Deg F. With A 35W Light Bulb Link To Thermostat About $8.00 Home Depot Or Lowes Lower Thermostat For Electric Water Heaters They Are Common To Many Water Hearters Https://Www.Homedepot.Com/P/Everbilt-T-O-D-Single-Pole-Lower-Thermostat-Residential-Electric-Water-Heater-Eb11695/204834403 Camco 8123 Lower Thermostat Camco Https://Www.Amazon.Com/Dp/B000Fkf5P0/Ref=Cm_Sw_R_Tw_Dp_U_X_2Ydoabfgjyc40 Via @Amazon The Fan Is From An Old Computer And Is Powered Be A Small 12V Power Adapter It Runs All The Time
Statistics
Likes
47
Downloads
0