LED light mount for Wanhao Di3 / Monoprice Maker Select v2.1
Description
Where I Put My Monoprice Maker Select V2.1 Was Kinda Dark And I Found Myself Moved My Table Lamp Or Even Uses Flashlight To Look At The Print Bed While Printing. Tried To Search For A Small Table Lamp That Fit My Shelf, But Nothing Really Hit Me. Then I Came Across Dracos' Design Http://Www.Thingiverse.Com/Thing:1532795 Which Looks Beautiful ! I Do Have Couple Reel Of 3528 Smd 12V Led Light Lying Around Waiting For The Next Project So I Start Tinkering Dracos' Design. His Was Meant For 5050 Smd, Which Is Slightly Wider Strip Than My 3528 Smd Strip. So I Modify All The Necessary Parts To My Led Strip'S Width And Print It Out. Work Perfectly. Included A Pic Showing How Many Pieces Of Which Stl File Need To Print. Looking From The Front Of The Printer, The Wires Of Top And Left Set Of Lights Ran Through The Left Z Column, The Right Set Of Lights Ran Through The Right Side, I Loop The Cables Around Z Motor And Go Underneath The Y Axis Frame And Zip Tie It To All To The Existing Wires Which Goes To The Power Supply And Simply Screw It Down To The +Ve And -Ve On The Power Supply. Printer On, Lights On, Printer Off, Lights Off. Oh Yeah. Now I Can See Everything Clearly Even With The Room Light Is Off. Since I Put The Psu On The Left Side Of The Printer And Mount The Filament Spool On Top Of The Psu, And I Got The Z Brace Mod Installed, I Found The Filament Was Rubbing On The Z Brace Quite A Bit. Hence I Created The Filament Feed Module. Well, It'S There And Work For Me.
Statistics
Likes
71
Downloads
0