10w Led Desktop Spot
Description
This Is My Desktop 10W Led Spot. It Uses A 10W Led, A 40 X 40Mm Fan And A Step Down Controller. The Led Panel Is Friction Fit And Requires No Bolts Or Screws. This Led Can Be Run From 12V To 24Vdc. I Recommend 12Vdc. I Set The Voltage On The Regulator While Measuring The Amps Drawn Between The Led And The Regulator To Max 900 Ma. The Heatsink I Used Is 36.2 X 30.2 X 15.2Mm That I Had Lying Around. The Step Down Controller Can Be Found On Ebay, Search For : Lm2596S Dc-Dc Buck Converter Power Supply Step Down Module Voltage Regulator The Power Switch Is A Rocker 6A 230Vac Spst Locking With A Body Size Of 17 X 12 X 13Mm. The 10W Led Can Be Found On Ebay By Searching For 10W High Power Led. The Wire Going To Your Supply Is Inside The Mount. The Stand Uses A M6 X 20 Bolt And 6Mm Nut. To Attach The Mount To The Led Box Use 4 Of M3 X 6 Self Tappers. (M3 X 8 Max) The Holes For The Mount In The Box Is 2.6Mm So You Can Also Try A M3 X 6 (Or 8) Caphead Bolt, It Should Cut Threads In The Casing Holes.
Statistics
Likes
16
Downloads
0