Mount for 2004 Smart Controller on Prusa i3
Description
Giraffe Type Holder For 2004 Smart Controller On Prusa Printers. Update: - Longer Arm, Prepared To Take Additional 5 Or 10 Cm Of Led-Strip. - Stl-Files With And Without Support - Lock Ring The Panel Is Simply Hooked To The Tip Of The Left Smooth Rod Of The Z Axis. Two Hinges Are Making The Mount Very Flexible. On The Left Side Is A Keyed Slot To The Sd Socked, Witch Makes It Super Easy To Insert The Sd Card. The Reset/Kill Button Is Realized In X Shape And It Is Slightly Set Back To Prevent Accidentally Killing The Print. Underneath The Frame Is A Grove For 15Cm Led Strip. It Is Connected By The Red Wire In The Pictures To The "12V_Aux" Socket On My Ramps Board. The Socket Is Located Between The Fuses And The X Axis Stepper Driver. (To Control Brightness I Used An Step Down Converter.) [See It In Action!](Https://Youtu.Be/3Tegcitwcp8) => See Also My Other Prusa I3 Reworks In [My Collection](Http://Www.Thingiverse.Com/7Steam/Collections/My-Prusa-I3-Reworks) => This Part Is Used In My [Prusa I3 Master Rework](Http://Www.Thingiverse.Com/7Steam/Collections/My-Wooden-Mendel)
Statistics
Likes
21
Downloads
0