Miniature Amstrad PC1640 NTP Deskclock
Description
**Update:** Added The Base Plate, A Final Version Of The Keyboard Base And A Floppy Box Model. This Is A Miniature Model Of A Classic Amstrad Pc1640 I Made To House An Oled Screen And A Esp32 Micro Controller. I Started This Project To See If I Could Model A Complex Object With Its Real Life Measurements Then Scale It Down For Printing With Openscad. To Build It You Will Need A Long (~30Mm) M4 Screw And Nut. I Recommend Some Rubber Feet Or A Piece Of 1Mm Rubber Sheet Since That Is What I Tend To Use On All My Prints Nowadays To Keep Them From Sliding Around. It Should Be Fine Without It Tho. For The Electronics You Will Need 2 3Mm Leds (Red And Green) As Well As Some Kind Of Microcontroller To Drive Your Display - I Used An Esp32 And An Esp8266. I Included Mounting Inserts Into The Monitor For The Common .96" And 1.3" Oled Modules You Can Find On Amazon And Aliexpress. I Will Add Some More Details In The Next Few Days And Maybe A Link Or Two To The Matching Displays And Boards.
Statistics
Likes
132
Downloads
0