BITx 40 SSB Build
Description
**************This Is A Work In Progress********************** Whens The Last Time You Build A Ssb Rig? Well This Was My First And Not My Last Rig I Will Build. The Bill Of Materials (Bom) Is Uploaded As A Excel File. It Contains All The Parts I Used, Prices If I Bought Them. Along With The 3D Printed Parts File Names. Included Is Some Good Photos Of How It Was Put Together, I Don'T Feel Like Taking It Apart. But Some Build Tips I Have Is Read The Hfsigs Wire Up Its How To Wire It Up. And Keep The Leads Short. Bitx 40 Ssb Radio With Digital Vfo (Http://Www.Hfsigs.Com/) Case (Http://Www.Ebay.Com/Itm/Plastic-Electronic-Enclosure-Project-Pcb-Box-Case-Desk-Shell-Cover-200X175X70Mm-/322017583916?Hash=Item4Af9Be632C:G:Agsaaoswqyzwzxzj) Vfo Knob: A 3D Printable Knob See Files, Meant For A 1/8" Set Screw (See Files) Updated 2/19/2017 Volume Knob: Really Simple, Use A 1/8" Set Screw To Hold It On. Screen Spacer: With A Hole In The Case The Screen Doesn'T Fit Flat So I Created A Spacer, One Thing Wrong With It Is That The Small Section I Cut Out To Make Fit Correctly. Mic And Ptt: This Is A Two Piece Mic Built With The Parts Included In The Bitx 40 Kit. The Only Thing That Is Not Included Was An Old Cb Mic Cable. The Cable I Have Came Off Of An Old Raider 4020 Cb. Did Do A Little Work On The Button On The Mic, Use A 1/8" Pin 0.5" Long And A Cut Down Pin Spring. I Will Post More Photos When I Have Time (3/5/2017)
Statistics
Likes
20
Downloads
0