Da Vinci 1.0a Internal Raspberry Pi Mount
Description
<H2>Turn Your Da Vinci 1.0A Into A Standalone, Wireless 3D Printer!</H2> <P>Mount A Raspberry Pi Running Octopi Inside A Da Vinci 1.0A Printer To Manage The Printer Through A Web Interface.</P> <P><Strong>Updated</Strong>: 1St October 2017 - Improved Bracket "Rpi_Bracket_2.Stl" With Stronger Pcb Mount Pads And Relaxed Tolerance On Tray Tab Slots. (Nb: Photos Still Show Older Bracket)</P> <P><Strong>Note</Strong> That Your Da Vinci <Em>Must</Em> Be Upgraded To Run Repetier Firmware. Octoprint/Octopi Cannot Work With The Stock Firmware.</P> <P>Requires:<Br> 1 X Da Vinci 1.0A Or 1.0 (Only Tested On 1.0A) 3D Printer <Em>Running Repetier Firmware</Em>.<Br> 1 X Raspberry Pi Model B+, 2 Or 3<Br> 1 X Usb Wifi Dongle (For Pi B+ Or 2 Only)<Br> Misc Cables For Power And Usb.</P> <P>Also Requires:<Br> Some Knowledge Of Electricity And Computer Internals.<Br> Acceptance That You Will Be Voiding Several Warranties During This Process.</P> <P>Optional:<Br> 1 X Raspberry Pi Camera<Br> 1 X >= 1 Metre Ribbon Cable For Camera</P> <P>Thanks To @Superwoodle For His Raspberry Pi B+/2 Mount!<Br> <A Rel="Nofollow" Href="Http://Www.Thingiverse.Com/Thing:1205961">Http://Www.Thingiverse.Com/Thing:1205961</A></P>
Statistics
Likes
30
Downloads
0