DB's Enclosure Kit
Description
This Is A Relatively Inexpensive But High End Looking And Very Sturdy Solution I Used Silicone Adhesives To Seal And Lock Everything Together, You Can Use Screws, Remember To Always Drill Holes First You Don'T Want To Snap The Plastic And Plexiglass. I Printed But Didn'T Use The Bracket Parts Since I Sealed The Plexiglass To The Aluminum Tubing With Silicone. Besides Individual Part Stls, I'Ve Setup 7 Stls To Print All The Parts Needed To Produce Whats Shown I Needed A Large Glove Box And I Couldn'T Find One The Right Size And Expandable If Needed. Also It Needs To Provided 360 Viewing For Cameras So I Went To The Local Hardware Store And Found; ( 2 ) 96" Long 1" Square Aluminum Tubing ( 6 ) 24" Squares Of 1/4" Thick Plexiglass I Already Had Thick & Long Solvent Gloves
Statistics
Likes
40
Downloads
0