Fidget Spinner Mitsu
Description
I Make A Spinner Called Mitsu. Its A Lighter One. You Need 9 X 8Mm Balls The Holes For The Balls Are Concave So That The Balls Hold In These. Put The Balls With A Hammer Or Something Under A Little Pressure In To It. For Better Spinning You Have To Clean The Bearings From The Oil. - Remove The Black Caps From The Bearing. - Soak It 3-5 Hours In Aceton Or Something And Shake It Sometimes - Blow The Bearings With Compressed Air Bearings: 608-Rs : Http://Www.Ebay.De/Sch/I.Html?_From=R40&_Sacat=0&_Nkw=608+Rs+Bearing&Rt=Nc&Lh_Prefloc=2 Balls: 8Mm: Http://Www.Ebay.De/Sch/I.Html?_Odkw=Stahl%C3%B6Kugeln+8Mm&Lh_Prefloc=2&_Osacat=0&_From=R40&_Trksid=P2045573.M570.L1313.Tr0.Trc0.H0.Xstahlkugeln+8Mm.Trs0&_Nkw=Stahlkugeln+8Mm&_Sacat=0
Statistics
Likes
140
Downloads
0