Azteeg X5 Mini to Print-Rite DIY mounting adapter w/USB cable clamp
Description
My Third Revision Of An Adapter To Mount An Azteeg X5 Mini Board To A Print-Rite Diy Printer'S Controller Board Mounting Holes. The Original Controller Board Screws Can Be Used To Mount The Adapter To The Original Holes And The Azteeg Board Can Be Mounted With M3 Screws (I Used M3X8 Machine Screws And It Worked Fine). This Revision Also Includes A Clamping Point For The Usb Cable. I Quickly Discovered During The Retrofit Process That The Mini Usb Connector Is Not Very Robust And It Takes Little Cable Motion To Break The Connection. The Clamp Can Be Used With Zip Ties Up To 3Mm Wide To Effectively Ensure That The Usb Cable Isn'T Pulled Loose. I Used Some 1Mm Wide Zip Ties. Note That The Version In The Picture Had A Slight Mistake In The Upper Right Corner, Which Has Been Corrected In This Print. This Was Originally Drawn In Sketchup.
Statistics
Likes
5
Downloads
0