A.R. Drone Prop adapter
Description
This Prop Adapter Replaces The Metal Adapters That Come With The Carbon Fiber Replacement Props And Does Not Require You To Cut The Center Hub Off Of The Stock Prop In Order To Work. It Will Fit Onto The Stock Gear Pegs And Provide A Mount For A Carbon Fiber Replacement Prop For The A.R. Drone 1.0. I Don'T Know How The 1.0 Compares To The 2.0. It May Work On That One As Well. The C-Clip Can Still Be Used To Secure The Shaft. I Used Button Screws To Secure The Prop Along With A Dab Of Blue Loctite And Have Had No Problems With Anything Coming Loose. Small Servo Screws Will Work Also. Since This Is A Moving Part I Highly Suggest Printing With A High Fill Rate. I Used 100%. I Also Recommend Printing At .2Mm Resolution With Pla. The Top Edges May Need To Be Trimmed Slightly In Order To Mesh With The Curve Of The Blade.
Statistics
Likes
13
Downloads
0