M Prime One - Fan Mount
Description
This Is A Fan / Blower Mount Designed For A M Prime One Printer With A V5 Clone With 25Mm (~ 24.8Mm) Cooler Diameter And A Volcano Heatblock. I Use A 0.6 Mm Nozzle/0.5Mm Layer Height And The Original Fan Simply Wasn´T Strong Enough (And In The Wrong Position) To Get Decent Results. Can Be Used With The Original Probe Holder Or My Design -> Http://Www.Thingiverse.Com/Thing:1701457 If You Mount It And It Is Too Loose You Can Simply Replace The Original 40X40 Fan With The Spacer. Use The M3X20 Screws Used In The Original M Prime One Design To Mount The Spacer Where The Old Fan Was Mounted. They Have The Exact Right Length To Keep The Blower Fan Mount In Place ;) The 5015 Blower Is Very Strong. You Should Do A Pid Autotune In Marlin To Prevent "Thermal Runaway" Errors At Higher Fan Speeds. Freecad Source File Included. Parts List / Bom: 1 X Printed Fan Mount 1 X Printed Spacer 1 X <A Href="Http://S.Click.Aliexpress.Com/E/A6Yb6Yb" Target="_New">12V 5015 Blower Fan</A> E. G. From Aliexpress 1 X <A Href="Http://S.Click.Aliexpress.Com/E/Aurrfmu" Target="_New">12V 4020 Blower Fan</A> E. G. From Aliexpress 7 X <A Href="Http://S.Click.Aliexpress.Com/E/Bmyvbyb" Target="_New">M3 X 20Mm Bolts</A> E. G. From Aliexpress 7 X <A Href="Http://S.Click.Aliexpress.Com/E/A6Eaufi" Target="_New">M3 Nuts</A> E. G. From Aliexpress
Statistics
Likes
4
Downloads
0