TDC for TM Mk23 Socom
Description
** Note ** This Product Is Designed For An Advanced User And Requires Assembly By The Form Of Tapping Your Own Thread With A Metric M4 Tap. And Using A Grub Screw For Adjustment And Pressure On The Nub. If This Is Not Possible There Is Commercial Tdc Mods For The Mk23 That Might Be More Appropriate For You. The Design Is Still Kinda Experimental, It Is Being Tested In Multiple Tm Mk23 Pistols, With Different Barrel Configurations, Trying To Find The Best Results. It Has Been Tested In A Stock Mk23 Socom With No Modification, Stock Tm Bucking And Nub, Original Adjuster Set To Off. With Good Results. Far Surpassing The Original Design That Does Not Provide Enough Movement Downwards On The Hop. I Have Also Been Using This With A R Hoped Maple Leaf Barrel With Great Results. Adjustment Is Alot Finer As Normal With R-Hop Systems. The Design For This Product Is Also Available On Shapeways, For Those Without Their Own 3D Printers. I'D Appreciate Any Donations To Help Expand My Tools Available To Continue My Airsoft Teching Journey. Thanks To My Tippers For This Design, You Guys Make It Worth While! Be Sure To Check Out Their Designs - [Dabluebunny](Https://Www.Thingiverse.Com/Dabluebunny) - [Allegfede](Https://Www.Thingiverse.Com/Allegfede/About)
Statistics
Likes
138
Downloads
0