ANET A8 | Rear Bed Level Sensor Holder (18mm, 12mm & 8mm)

Description

**Update April 2017:** If You Are Looking For More Customization, See Also [Version 2](Http://Www.Thingiverse.Com/Thing:2219963)! <Br> I Like The Nice Design Of [Lucacap](Http://Www.Thingiverse.Com/Lucacap)'S Rear Bed Leveling Sensor Holder (Http://Www.Thingiverse.Com/Thing:1883473). All Credit For The Fantastic Design And Idea Goes To Him! Nevertheless, The Original Design Requires To Tap Threads Into The Metal Bearing. This Modified Design Is Equipped **With Plasic Dowels**, Which Fit In The (Non-Threaded) Holes On The Back Of The Linear Slides And Are Secured With M3 Screws (E.G. M3 X 10Mm). **No Thread Taping Required!** The Download Section Holds A Version For A 18Mm, A 12Mm As Well As For A 8Mm Sensor! **Note:** Depending On Your Sensor And Your Cable Management You May Loose Some Centimeters Of Available Print Height Due To A Interference Of Sensor And Printer Frame. <Br> **Firmware Configuration:** Due To The Altered Sensor Position The Following Changes Have To Be Done In The `Configuration.H` File (Search Vor The Capitalized String And Adapt The Subsequent Numbers): *[With My E3Dv6 Mount / Carriage](Http://Www.Thingiverse.Com/Thing:2099577):* `#Define X_Probe_Offset_From_Extruder 0` `#Define Y_Probe_Offset_From_Extruder 50` *With The Stock Carriage:* `#Define X_Probe_Offset_From_Extruder 26` `#Define Y_Probe_Offset_From_Extruder 50` *Additionally For All Setups:* `#Define Front_Probe_Bed_Position 50` <Br> (Note For Those Who Don'T Own A Sensor Yet: I Use [This Sensor](Http://Amzn.To/2Kpzqi4))

Statistics

Category

Tags