TBS (Team BlackSheep) G2 Cube Standoff

Description

Here'S A Small Model I'Ve Used In My Own G2 Build. This Will Allow You To Mount Say For Example A 4-In-1 Esc Without Using Standoffs Directly On The Foam, In An Attempt To Not Crush It As Much. It Worked Nicely For Me. In The Files You'Ll See 2 Versions - A Very Simple Design That Should Work Good As A Standoff, And The 0.2 Version Which Is Specific To The Racerstar 4-In-1 30A Blheli_S V2 Escs. The Fets Are Situated Right Next To The Screw Holes And So I Modified The Design So That It Will Sit Flush Without Damaging Or Fouling The Fets.

Statistics

Category

Tags