Prusa i3 Hexagon Bowden mount
Description
Bowden Mount For A Hexagon Hot End On A Prusa I3 Carriage. Hardware Needed: M3X16Mm Screw (2X) To Assemble Hot End Clamp M3X8Mm Screw (10X) To Assemble Fans (4Ea) And Fan Duct (2) M3 Nuts (12X) For M3 Screws M2X10Mm Screw (4X) To Install 40-To-25 Fan Adapter M4 Nuts (4X) To Mount To Carriage Either The Original 25Mm Hexagon Fan Or Any 40Mm Fan Can Be Used To Cool The Hot End. A 40Mm Fan Is Recommended For Hotter Plastics Due To The Increased Airflow Restriction In This Mount. It Uses 23Mm Square (M4) Mounting Hole Spacing For The Carriage Mount.
Statistics
Likes
15
Downloads
0