HICTOP Prusa i3 Upgraded Corners w/ Y-Axis End Brackets
Description
**Important** The Wide Version Requires A Longer Aluminum Extrusion For The Top Bar The Z Axis Guides Mount To. 430Mm Or Larger. I Was Pretty Disappointed With The Metal Brackets That Came With The 3Dp-11, And I Also Found Spacing The Aluminum And Y-Axis Rods To Be A Bit Wonky, So I Decided To Make An All-In-One Better Bracket That Would Not Only Fix Spacing Issues, But Also Provide Better Support. [Flush Version Tinkercad](Https://Www.Tinkercad.Com/Things/7Jw46R5P5Np-2020-Corner-Prusa-I3-Flush-Slim/Editv2?Sharecode=Yxoiqxcwqdxun7Clbemvsijms1T6Otuokhdrmb-Cjog=) [Wide Version Tinkercad](Https://Www.Tinkercad.Com/Things/9Agykjpl9Ea-Copy-Of-2020-Corner-Prusa-I3-Flush-Slim/Editv2?Sharecode=Z69Czwvp-Ogxc4Mi4_Rpfprrpf2Lbjmk19Xddkfeyhc=) [Flush Version With Removable Endcap](Https://Www.Tinkercad.Com/Things/Ghoia9Jupns-2020-Corner-Prusa-I3-Flush-Slim-Endcap/Editv2?Sharecode=Altxynqt0Kz9Eqjmjza5Junkfp1Nqqehplrjrnc2Rho=) [Wide Version With Removable Endcap](Https://Www.Tinkercad.Com/Things/Ixtk8Vgmjnt-2020-Corner-Prusa-I3-Wide-Endcap/Editv2?Sharecode=7Coh54Bu7Itr0Mg6Lyqcjry7Rhleuqbhctiznd1Zgh4=) [Endcap Cover](Https://Www.Tinkercad.Com/Things/Btldahmxhmy-Hictop-Prusa-I3-Endcap-Cover/Editv2?Sharecode=Rynzqn3Q2F-Vtz4Ssxjkcjs_Urccmdzomxgw9Deedyu=) The Flush Version Has The X-Axis Strut Flush Against The Side Of The Y-Axis Strut, While The Wide Version Leaves A 20X20X20 Space On The Corner For Mounting Feet / Cube End / Whatever. Both Of These Files Are For One Side Of The Printer. Just Mirror Print For The Other.
Statistics
Likes
65
Downloads
0