P.I.N.D.A. PROTECTOR for 12mm Inductive proximity sensor LJ12A3-4-Z + VIDEO
Description
Read Print Notes Please! Now With Correct M12X1Mm Thread Instead Of M12X1.75Mm. I Saw That Prusa Has An Additional Thing On Their Website Called A [P.I.N.D.A. Protector](Http://Www.Prusa3D.Com/Prusa-I3-Printable-Parts/). A Snag Protector For An Inductive Proximity Sensor For When A Part Of Your Print Warps Or Peaks Up And Hits The Probe. Since The Prusa Mk2 Uses A Smaller Diameter Probe, This Does Not Fit On The Widely Used 12Mm Version Lj12A3-4-Z/Bx Or By. So I Designed One Using Autodesk'S Fusion 360, As With Many Of My Other Things. I Hope You Will Enjoy It As Well! This Sensor Only Detects Metal Print Surfaces. When Using A Build Mat Like Buildtak Or Lokbuild, You Might Want To Upgrade To The Lj18A3-8-Z/Bx Dat Detects Up-To 8Mm Away (Way Less Using Alu Beds). This Way You 12Mm Version Will Not Hit Your Prints And Upset The Positioning Of The Head/Nozzle When A Piece Of The Print Sticks Out A Tiny Bit. Because The Bottom Of The Sensor Will Be Basically At The Same Height At The Tip Of The Nozzle. You'Ll Thank Me Later. :) Subscribe To My Channel: See This Thing Getting Printed [Here](Https://Www.Youtube.Com/Watch?V=2I-Tr84Rjs8), With Some Behind The Scenes Fusion 360 Footage. ;).
Statistics
Likes
13
Downloads
0