QX90 MINI WHOOP QUAD V2
Description
##Update 4/10/2017## Updated The Frame Yet Again. Weights About The Same, But Is A Lot More Crash Resistant. ##Update 3/5/2017## I Have Updated The Frame To Account For Varying Shaft Lengths In The 8520 Motors. I Have Found There Are Two Basic Lengths, So This Design Allows The Motor To Be Raised Or Lowered As Need. I Have Also Added A New Camera Mount For This Camera: Http://Us.Banggood.Com/Wholesale-Warehouse-Eachine-Aio-5_8G-40Ch-25Mw-Vtx-800Tvl-13-Cmos-Fpv-Camera-Upgraded-For-Qx90-Qx95-Racing-Quadcopter-Wp-Usa-1086282.Html?Rmmds=Myorder Which Has A Picture Far Superior To The Stock Cam That Came With My Qx90. I Am Also Using This Flight Controller Which Has An Integrated Rx, But This Frame Will Support Most Micro Controllers: Http://Us.Banggood.Com/Wholesale-Warehouse-Eachine-Frf3_Evo-Brushed-Flight-Control-Board-Built-In-Frsky-Compatible-Sbus-8Ch-Receiver-Wp-Usa-1091779.Html?Rmmds=Myorder These Are The Motors I Have Been Using: Http://Www.Banggood.Com/Eachine-Tiny-Qx90-Micro-Fpv-Racing-Quadcopter-Spare-Parts-8_5X20Mm-Coreless-Motor-P-1079157.Html?Rmmds=Myorder ---------------- This Is The V2 Version Of The Original I Created: Http://Www.Thingiverse.Com/Thing:2071183 Here'S A Video I Made This Morning: Https://Youtu.Be/Hy3A0Po7R4A (Also Known As 'How To Annoy Your Wife') Major Improvements Are That It Is A Little Lighter (.5G); A Little Stronger And Allows Access To The Usb Port While Mounted. This Model Is A Modified Version Of Osliang'S Quad Which Can Be Found Here: Http://Www.Thingiverse.Com/Thing:1700311 . I Dont Think I Could Have Started This Project Without That Original Project. I Have Moved The Camera Further Forward And The Frame Is Lighter At Just Under 10G (Without Cam Mount & Tray). All Loaded Up With Battery And Stock Qx90 Parts (As In The Photos) Its Just Under 58G Which Is Heavier Than The Original Qx90 (Which Weighs I Think 54G). It Seems To Fly Really Well. I Have Included The Solidworks Design Files. If You Make Changes, Let Me Know. I Might Want To Add Those To My Model. This Has Been Designed For The 8.5Mm Motors. I Printed This In Abs With 30% Fill (Fill Is Barely Used) Except The Vtx Guard Which I Printed At 0% Fill So Its Hollow And Lighter. Also, It Will Require Supports To Print. Good Luck.
Statistics
Likes
88
Downloads
0