Dial Holder for calibrating heatbed
Description
I Have Made This Holder For All Dial Indicator, Without A Holder On The Back. The Hole Is 8Mm And Match All Dial Indicator. I Tried First To Place The Dial On The Extruder Head, So I Could Move It Around With The Head. It Turns Out That The Weight From The Dial, Alone Did Change The Readings And Result. So I Ended Up With A Remix Of Another Mount, That Matches My Indicator. I Hope That This Is Useful For Others Here. Please Add Comments If I Could Change Something In The Design. It Took Me 5 Attempts To Get This Version At A Useful Stage. I Have Added 2 Versions One With Support And One Without Support. Because Repetier Host Did Not Want To Create Proper Support For This. I Do Also Recommend To Print This At A 45 Degree Angle To The Heatbed, Because The Printer Head Keeps Getting Stuck For Me, And Thereby Loosing Steps In The Y Direction. This Print Requires: 2 X M3 Nuts 1 X M3 Bolt 8Mm Long (12Mm With Head) 1 X M3 Bolt 45Mm Long (48Mm With Head) Best Regards Søren
Statistics
Likes
15
Downloads
0