Anet A8 Bowden Extruder Mount
Description
Tidier And Very Sturdy Mount For A Bowden Extruder. Designed Specifically For Anet A8. Lines Up Nicely With Your Hot End Too. The Idea Of A “Bowden” Is To Remove The Huge Weight Of The Motor Off The Print Head Carriage. You Will Need An E3D V6 Hot End. Genuine Is $100, Clones From Ebay Are $20 Example Here: Https://Youtu.Be/Rne4Dfl_8Di Requires: 2 M3X25 1 M3X20 The Two Original M3X18 From The Anet A8 Frame *You Will Also Need To Choose From Thingiverse And Then Print A New Hot End Carriage For You E3D V6* The Toothed Wheel Should Be Brought Forward By 5Mm With The Smallest Supplied Allen Key. The Centre Hole Is 24Mm Wide So Up To You If You Use Supports. I Print Nearly All My Parts In 50% Density So Again Up To You What Your Preferred Infill Is. Printed In Pla So 'As Is' 100% Scale In Cura Edit: Added Left Side Mount. Edit: Added Original 123D File For Remixing Caution For Us Users: The Bowden Fitting For Original And Clone E3Dv6'S Seems To Be An Imperial Larger Fitting And Will Not Fit. The Correct Fitting Is A Pc4-M6.
Statistics
Likes
2633
Downloads
0