Pinewood Derby axle drilling guide
Description
This Is A Guide/Jig For Drilling Axle Holes On A Pinewood Derby Car. One Side Is At 2.5Mm Above The Bottom And The Other At 3.5Mm So You Can Run 3 Wheels Touching If Your Rules Allow. If Not, Just Use The Same Side For All 4 Holes. It'S Sized For 45Mm Width Which Worked Great For Me But You Can Scale The Width Slightly If Needed To Fit Well. The Holes Are A Bit Snug But You Can Drill Them Out Easily.
Statistics
Likes
51
Downloads
0