Customizable Aerobar Bike Computer Mount
Description
This Is A Highly Customizable Means Of Mounting A Bicycle Computer To Your Aerobars. Many Aspects Can Be Customized, To Include: * Clamp Inner Diameter (To Fit Your Aerobar Diameter) * Clamp Wall Thickness * Clamp Width * Adapter Diameter (To Mimic A Handlebar Diameter Appropriate For Your Computer Mount) * Arm Angle (To Achieve The Desired Height Above/Below/At The Aerobar Height) * Arm Length (To Allow Desired Horizontal Positioning On Aerobar) * Height Of Top Of Adapter Above Arm (To Again Allow Vertical Customization) * Channel Depth/Width/Spacing For Securing Computer Mount Fastening Straps (Zip Tie, Rubber O-Ring, Etc) * Bolt/Nut Dimensions (For Countersink Of Nut And Bolt) * Fudge Factor For Dimensional Tolerance Of Adapter That Fits On Arm (It Can Be Hard To Get A 3D Printer To Produce The Same Inner And Outer Dimensions For A Specified Value...) * Whether To Print The Arm, The Adapter, Or Both (As Well As Which Orientation To Print The Adapter In - Vertical Or Horizontal) * And More :-) This Can Be Printed In Pla Or Abs, But If You Anticipate Possibly Leaving Your Bike In A Hot Car, Abs Might Be Better. The Round Adapter Piece Fits Over The Arm Of The Clamp, And Mine Stays Firmly In Place As A Result Of The Zip Ties Used To Attach The Computer Mount Base To The Aerobar Mount/Adapter. It Could Also Be Glued Or A Small Screw Could Be Used, If Desired. (Mine Does Not Move At All, Just From The Zip Ties, Which Are Needed For The Computer Base, Anyway.) Mine Is Printed In Abs, And Has Provided A Very Strong, Secure And Rigid Mount For My Computer. Someday I May Print Another In A Different Color (Black? Red? :-), But Green Was What I Had On-Hand At The Time!
Statistics
Likes
18
Downloads
0